Kannad Aircraft Antennas
In stock
A choice of 406/121.5MHz antennas is available to suit any sub-sonic aircraft. For most GA applications, the AV200 whip antenna is the logical choice, combining high performance with entry-level pricing. Most helicopters will be better suited to the AV300 rod antenna, as will aircraft with a VNE in excess of 250 knots. For all aircraft with a VNE in excess of 350 knots we recommend the ANT500 blade antenna.
The Kannad Integra ELT has a built-in 406MHz antenna. Provided the unit is mounted in a position where it can see at least a part of the sky, either in a glassfibre fuselage or under a canopy, an external 406MHz antenna should not be needed, though national regulations may still require one to be fitted. Check with your installer for the rules in your country.
Share:
AV200 Whip Antenna
A whip antenna suitable for aircraft speeds up to 250kts
Dual frequency 121.5/406MHz
Can easily be installed through a single hole (Ø 13 mm, 0.515 in.) in the aircraft skin
Female BNC connector
Impedance 50 ohms
VSWR:
2.0:1 or better@121.5 MHz
1.5:1 or better@406 MHz
Weight: 85g
Height: 609.6mm
AV300 Rod Antenna
A glassfibre rod antenna suitable for aircraft speeds up to 350kts. Also suited to helicopter installation where vibration can be an issue for whip antennas.
Triple frequency 121.5/243/406MHz
Metallic base plate with 3 fixing holes
BNC connector
VSWR:
2.0:1 or better@121.5 MHz
2.0:1 or better@243 MHz
1.5:1 or better@406 MHz
Max. Power 10W CW,
Efficiency > 85%,
Weight: 255g,
Height: 355mm
ANT500 Blade Antenna
The ANT500 is used primarily by airliners, but can be fitted to any sub-sonic aircraft.
Triple frequency 121.5/243/406MHz
Fully compatible with the range of KANNAD 406 ELTs (except 406 AF-COMPACT)
T6 Aluminium + glass fibre
Skydrol resistant enamel Finish
BNC connector
VSWR <2.3
Max. Power 5W CW,
Vertical polarisation,
Weight: 730g,
Height: 249mm
Related products
